EMC EMI probe set sniffer

Home
Analyser Options
EMC EMI probe set sniffer

RRP:
Price:: $4,980.00
SKU:: PBS2
Vendor:: AARONIA AG
Brand:
Weight:: 3.00 KGS
Rating:: ()
Availability:
Shipping:: $49.00 (Fixed shipping cost)
Current Stock:
Gift Wrapping:

Product Description

EMC EMI probe set sniffer 100kHz to 3GHz

Specifications:
PBS1 & PBS2 Sniffer Set: Frequency range: 100kHz-3GHz Pre-Amplifier noise (PBS2): 3.5dB typical PreAmplifier type/gain (PBS2): "linear" falloff. 1MHz: 40dB; 500MHz: 37.5dB; 1GHz: 35dB Dimensions of case (L/W/D): (320x250x100) mm Weight PBS1 (case incl. probes): 1200gr Weight PBS2 (case incl. probes and pre-amplifier): 1500gr Warranty: 10 years
10mm magnetic field probe: E Field shielding: 41dB Maximum resonance frequency: 790MHz Connector: 50 Ohms BNC socket (f) Warranty: 10 years Specifications may change without prior notice	30mm magnetic field sniffer: E-field shielding: 29dB Maximum resonance frequency: 1.5GHz Connector: 50 Ohms BNC socket (f) Warranty: 10 years Specifications may change without prior notice	60mm magnetic field probe: E-field shielding: 11dB Maximum resonance frequency: 2.3GHz Connector: 50 Ohms BNC socket (f) Warranty: 10 years Specifications may change without prior notice
Isotropic E-field sniffer: H field shielding: 30dB Maximum resonance frequency: >3GHz Connector: 50 Ohms BNC socket (f) Warranty: 10 years Specifications may change without prior notice	Directional E-field probe: E-field shielding: 30dB Maximum resonance frequency: >3GHz Connector: 50 Ohms BNC socket (f) Warranty: 10 years Specifications may change without prior notice

Included in delivery:

1 x 60mm magnetic field probe

1 x 30mm magnetic field probe

1 x 10mm magnetic field probe

1 x isotropic E-field probe

1 x directional E-field probe

Pre-amplifier with power supply (only PBS2)

Transport case with paddings

Exhaustive manual (English)

Details:
Magnetic field measurement on a group of components using the 60mm H-field probe.	Our EMC probe set allows for straightforward pinpointing and measurement of interference sources in electronic component groups as well as execution and monitoring of generic EMC measurement. Our probe set is especially suitable for: - Pinpointing interference sources - Estimation of interference field strength - Verification of shielding and filtering measures - Identifying faulty components - Detecting circuitry overly sensitive to interference Our set includes a total of 5 probes: 3 probes for magnetic field measurement and two for measurement of electric fields. All probes are covered with an insulating layer, thus allowing safe measurement of oscillators or mains lines. The PBS2 probe set additionally contains a high-performance pre-amplifier, allowing measurement of significantly weaker interference sources, boosting the sensitivity of our instruments by up to 40dB. All probes have deliberately been implemented as passive devices to make them usable as transmitting devices as well. Consequently, components and circuits sensitive to interference can easily be pinpointed.
Pinpointing interference sources on a circuit board.	Perfect for locating interference sources which might have been found e.g. in an EN55011, EN55022 or EN50371 (Class A or Class B) survey. After implementing appropriate changes in the circuit, their efficiency can easily and reliably be verified. That way, expensive and time-consuming re-assessments in an EMC laboratory can be skipped.
This EN 55022 B survey discloses a multitude of problematic sources of interference. With the help of our ADP1 & ADP2 probe sets, these emitters can easily be pinpointed and eliminated.	Verification of official EMC limits: For example, should an interference source exceed an official EMC limit by 10dB, our probe set can easily verify if a certain countermeasure succeeds in making the circuitry conforming again. This is another situation where the probe sets can eliminate the need for expensive and time-consuming measurements in EMC laboratories.